Track Saw Vs. Circular Saw-What’s the Difference?
Last Updated on
Woodworking is one of the most enjoyable activities that you can do alone. With the right knowledge, a few guidelines, and undying interest, woodworking can make of the best hobbies in the world.
However, to get the best results from woodworking, you’d have to get a grip of every tool. Woodworking has so many cool tools. And the more you can master hoe they work the better. With complete mastery, you will be able to have some of the best results out of your woodwork.
In this post, I want to give you a detailed comparison of Track Saw vs. Circular Saw. These two tools are some of the most essential woodworking tools. Nonetheless, many people face a dilemma when it comes to using them. Here is a simple post to help you in making the right choice.
Track Saw Vs. Circular Saw: What You Must Know
Unlike track saws, a circular saw has a high-speed motor and has its blade protruding. The basic circular saw comes with a blade, motor, base, and a blade guard.
To get the perfect depth of cut in a circular saw, you will have to loosen a thumb and then turn the holding nut. You can then set the saw’s base to a depth that is perfect for your type of woodworking cut.
However, this is not the case with a track saw. When using a track saw, you can simply adjust the depth of your cut by the sliding technology that’s set at the front section of the saw. This is really simple to do.
There are many types of track saws available in the market today. You would be better off reading the track saw reviews offered at Tools Adventure website.
When cutting with a circular saw, the guard will move out of the way by retracting. In turn, it will allow the saw to easily make the cut. A track saw, on the other hand, has a great design that eliminates the need for a retractable guard for the blade. Its blade is also enclosed within the setup.
Safety of Use
Looking at the blade designs from the safety point of view, the track saw is safer. It has an enclosed blade guard, which will significantly improve its safety use. You will, therefore, have an easy cut.
Cut Start Point
However, when using a circular saw, you cannot start your cut in the middle of the plank. Instead, you have to start right at the end of the plank that you are working on. And this is where the track saw beats the circular saw.
The track saw’s blade can be plunged at whichever point that you choose. What this means is that you can start your cut anywhere across the plank. You can start from the middle or from any end.
Then again there isn’t a way that the dust will be extracted by the circular saw. You have to do it manually. The saw’s side is open and has no dust collection pouch. The track saw, on the other hand, with its enclosed design, not only improves the safety but also provides an efficient dust extraction technology.
Unlike the track saw which will track the type of cut to make a straight and consistent cut, a circular saw has no cutting formula that guarantees accuracy. Instead, you have to mark the line of the cut before you begin.
Even worse, is that when using a circular saw, you won’t have a way to set up the saw for a splinter-free cut. This is unlike the track saw that uses additional technology to give one of the best splinter-free cuts. I will tackle the technology next.
The Cost/ Price
The track saw costs more. By the look of the saw’s abilities and technology, that’s no surprise. It makes your work easy and comes with many add-ons to give you a better experience. It means that if you have to use this saw, you might need to deep a little more in your pocket too.
NOTE: Actually, the track saw has a smooth and very flat side. This smooth side guarantees easy guidance through a plank, wall, or even against the floor. This same side is the reason why; starting your cut in the middle of the surface is easy.
Finally, the biggest difference between the Track Saw Vs. Circular Saw is the track saw’s ability to work along a track or rail.
If you want the perfect cut, I suggest that you make use of a guide rail. The best guide rails can be found in the local hardware. They are easy to use and can also be joined flawlessly using smart connecting pieces.
On the underside, the guide rail offers a non-slip material that prevents the guide from sliding off the trail. This technology will ensure that you get the maximum accuracy in your cut. Even better, is that the rail clamp has an option that adds an extra stability.
As if that’s not enough, the rail also comes with splinter guards made of plastic. They assist to guard the edge of the cut and will come in handy when you are cutting specific materials that are splinter prone. That’s why they use of a track saw is best for laminate board and worktops.
These two saws are great woodworking equipment. However, the type of saw that you will end up with depends on your needs. Both of them are portable and will work pretty well for you around the workshop. They are easy to set up and require no help at all. Given the chance, make sure that you determine the needs you want to be met first. Then choose a saw that meets every one of them.
When it comes to Track Saw Vs. Circular Saw, I always recommend the use of a track saw with a dust extraction mechanism. It makes your work easy and eliminates the splinters. More importantly, it eliminates any chances of consuming the harmful dust particles.
The machine also makes it easy to track you’re your cut. It saves time and will get the job done in no time.