Chainsaw Milling Tips That Save Your Day
Last Updated on
Milling is probably something quite challenging when you decide to do it with a chainsaw, right? Milling woods are quite difficult, especially if you have no previous experience in this.
Some typical models that handle firewood might fail in milling absolutely. So, of course, you are going to need a high-quality chainsaw mill that can handle heavy-duty chores gracefully.
One more thing that you’ll need is tactics, tricks, and chainsaw milling tips that make the task simpler, in some cases possible.
Chainsaw Milling Tips: Making it Simpler, Easier & Doable
There are not very demanding tactics that anyone needs to follow for milling. But quite a handful of tricks can really save your projects. And we are going to discuss some of them today. If you are interested in getting a chainsaw mill then there’s a very helpful review guide here to check.
Moving on, let’s know about what tricks and tips can really work for your chainsaw milling.
You Need a Right Milling Check List
For the CS (Chainsaw) mill adventure, very first tip or hack is about assembling right things. Yes, you need a certain checklist covering everything essential and that’s something most people don’t start with.
So, they later keep on halting the whole process and go get that particular stuff from home improvement stores. Using milling means the involvement of lots of tools and so, you need to ensure everything is present.
I’ll share a checklist of mine below:
- 1A milling chainsaw of good power.
- 2Milling attachment bought or DIY made.
- 3Measuring tape.
- 4Clamps and ladder.
- 5Spacers to set up the mill.
- 6Some sort of mill kit.
- 7Sharpening kit for the chain.
- 8Protective wears like gloves, earplugs, CS (Chainsaw) trousers, and similar stuff.
Straight Edge Needs Setup
One of the most difficult places where people get stuck with milling is when it comes to creating a straight cut. This is clearly too hard to accomplish since a straight line is quite difficult to get a hold of with any tool. However, using some sort of follow tool can help greatly.
There are rails and ladders that can make a good candidate for such tasks. Many experts used to get an aluminum ladder for the perfect weight and rigidity features.
Pay Attention to Log Placement
Log placement is a place you need to work for effortless cuts. Think it this way, if you are wholly comfortable with the posture then hardly will any cuts be accurate.
So, make sure your knees are not holding the whole pressure. Also, it’s too weird to work with a bent position. Make the log rise up off surface. Slop will also work. Slop under the log length direction where you’ll be making cut will help a lot.
The Rule of Start-Up
Solid mill frame and straight edge are essential. The depth of cut needs to be checked. Also, the log’s stability is something you need to consider. The work area has to be absolutely clear from any disturbance. Safety equipment are your best friend.
And you are set to start for milling effortlessly. Yes, these are few rules for beginning the mill that makes way for faster results.
One common mistake that we all do quite often is seesawing the CS mill while making a cut. The cutting speed does not improve this way, it’s a misconception. Instead, the finish gets gauge and weird.
Too Much Force
Sometimes we tend to push too much pressure for milling. This does not increase the speed instead makes process slower.
You should not apply too much force because chain has the ability to feed itself into a log. Make sure there’s no dull chain into the business. If that’s the case, you are investing your time for a wrong reason and applying pressure.
Start, Stop & Start Again
I know we want to finish the chore as soon as possible. So, going for a one-shot cut is quite preferable undoubtedly. However, even with so much ambition, sometimes it's best that you stop midway. Maybe to refuel, give the saw bit break or simply maneuver the cut better.
This slow approach is loved by experts because it helps to reduce the finished gauge. Going wide open throttle constantly is a bad way that holds the chance of damaging your tool. Instead, use gentle throttle easing and then starting one again steadily.
Sharp Chains Are a Superhero
Milling, no matter what amount, clearly depends on one thing. And that’s the extent of sharpness in the chain you are using. The whole CS milling theory works excellently when the chains are consistent and sharp enough.
Learning a few files and fancy tactics to sharpen your dull chains will really pay you better later. So, don’t forget to add some sharpening rituals into the maintenance routine.
There’s a lot I want to share but this should be enough for starting users. Hopefully some other day I’ll share more chainsaw milling tips that can make you a perfect expert in this chore.
The milling process is tiring and a bit demanding, I agree. But if you know about the basics and some interesting hacks, this becomes quite simpler.
This is true with any other process related to sawing. So, don’t lose hope if you are a beginner. You can do it once the right time comes and your skills improve. Till then hang on there and keep on trying. Good Luck!