Archive

Category Archives for "Power Tools"

Best Digital Multimeter Reviews & Buying Guide

If you want to check AC output and fuses in your home, terminals of the wires, batteries of a cordless impact driver and the motor driver of your saws, so you need a digital multimeter. A digital multimeter should most definitely be a part of every lab, workshop and for household DIY repairs. The best digital multimeter is the one that can record rapidly changing values with pinpoint accuracy across the variety of testing modes.

A digital multimeter is a testing tool or measuring device. It is basically a measuring device used to measure different electrical values such as voltage (volts), current (amperes), resistance (ohms) and continuity.

Continue reading

Dewalt DCF887 20v 0.25” impact driver with 3-speed control

Overview

dewalt dcf887Dewalt has come out with a new 20v Max Impact driver, model DCF887. This was launch after older model DCF886, and it appears to be closely base off of the DCF886 design. The DeWalt DCF886 impact driver, which is our best cordless impact driver my pick and features the singer variable speed control. But The Dewalt DCF887 has some different with the older model feature. The new brushless motor impact driver, DCF887 is shorter than DCF886, and it features 3-speed control separate, and it is higher than previous DCF886 nearly 22% powerful at its highest speed and torque setting.

features and specs of DCF887

  • Brushless motor
  • Max torque: 1825 lbs
  • Dimensions: 5.3” Front to back
  • 3-speed setting with precision speed 1.
  • 3 LED with 20 sec delay after trigger release.

The DCF887 launched with 3 options: DCF887B is the bare tool, and a DCF887D2 kit comes with (2 ) batteries 2.0Ah packs, and a DCF887M2 kit comes with (2) batteries 4.0Ah packs.
The kits also include a fast charger, belt clip, and kit box.


Look at the spec; I found in Dewalt’s website about information of DCF887. It is shorter in length (5.5”-5.3” = 0.25”) than the DeWalt DCF886, although on the Amazon’s page description says that it is shorter 2mm than previous the DCF886, which would be 0.0787”. This is a reason why it can fit into tight areas.
The DeWalt DCF887 does have 3-speed; module 1 0-1000 rpm, module 2 2800rpm, and module 3 3200rpm. At module 1, speed is low speed and low torque, that can work precision driving with a small fastener and is good for a small machine, wood screws for things like a cabinet, furniture, etc. At module 2 and 3 are faster and higher torque. You can work with bigger screws and even can loosing the lug nut at the highest setting 1825 lbs torque.
At module 3 is highest torque, it is really higher more about 22% powerful than previous model DCF886 (1825 lbs – 1500lbs = 325 / 1500*100 = 21,67%). It is also higher nearly 10% than Bosh IDH182 hybrid impact driver that I wrote before. The DCF887 impact driver can work with deck screws and lug nuts for automotive.
One other hand, The DCF887 features ¼” hex chuck with one- handed loading, and accept to 1” bit tips. It is easy to change tool with grip sleeve. The tool also includes a belt clip.
For me, I like dcf886 with singer variable speed, but I may be hard to find a reason to dismiss the advantage of DCF887. With DCF886, it can be limiting speed when you need to work with less torque, but the DCF887 you can choose which speed level what you want to do. At this time, it is one more option for you that you can choose for your project.
Let us know, what your experience about model DCF887 you want to share?

DEWALT DW745 10-Inch Compact Job-Site Table Saw Review

dewalt dw745 compact job-site table sawDewalt DW 745 is a table saw primarily used by woodworkers who need to saw through timber for making shelves, shelving materials, cabinets and timber for making doors and sidings. It is a powerful table saw that features a 10 inch, 24 tooth blade which spins at 3850 revolutions per minute. This saw has a 20-inch rip capacity and a rack and pinion fence design that delivers accurate and smooth fence adjustments. It is manufactured by Dewalt Manufacturing company, a toll constructor that is headquartered in Maryland, Baltimore USA.

Its powerful motor can easily cut through hardwood and pressure-treated timber.That aside, it is small and portable, weighing in at only 45 pounds. It does not require much storage space as it is foldable and compact. It can cut as deep as 3-1/8 inches at 90 degrees and 2-1/4 inches at 45 degrees.

Why buy Dewalt DW745 product?

When looking to invest in a table saw, you need one that suits your needs. This particular product has the following qualities that make it popular;

  • It’s light, weighing at only 45 pounds.
  • Easy to assemble.
  • It’s portable.
  • Has port for collecting dust that makes it easy to clean.

Product Description:

Dewalt dw745This tool comes with a user-friendly manual that explains every step of assembling it. The set-up requires no tools at all and can be done just about anywhere since this saw is portable. It has a 15 amplitude motor as well as a 20-inch rip capacity and a 10-inch blade. These features make for clean and quick cuts on even hardwood and wood that is pressure treated.  Its revolution per minute (rpm) speed is 3850, making for not just clean cuts quick ones as well.

This table saw comes with a 3-year warranty and a year’s guarantee of free service. If unsatisfied with the product or should it be faulty from the manufacturer, a customer is allowed a 90 day return period, with a full refund guaranteed.  Because of its site Pro Modular Guarding system, it’s quite easy to adjust its settings, without the need for tools, to suit your preferences.

Thing we like:

  • Dewalt DW745 is a lightweight, weighing at a mere 45 pounds, thus easily portable.
  • Easy to assemble without the need for special tools.
  • The accuracy of the blade is high, thanks to its size – 10 inches and a speed of 3850 revolutions per minute.
  • It has rack and pinion fence design that delivers accurate and smooth fence adjustments.
  • Its site Pro-Modular Guarding system makes it flexible to adjustments that will suit different types of jobs.
  • It has a port for dust collection, thus making it easy to clean.

Thing we don’t like:

  • The warranty is limited. It might not be very well for buyers outside of North America.
  • No dado cutting support.

Verdict:

This product is manufactured by one of the most trusted brands in the market. DEWALT has been in the construction equipment industry for over 80 years. With this kind of exposure and experience, the brand has learned from previous brands and can be trusted to deliver.

This particular tool is very powerful; with the motor strength of 15 amps and the rotation speed of 3850 per minute, it’s able to carry out detailed jobs such as cutting hardwoods, with excellent accuracy. The fact that it can be carried to site is also a selling point.

The Modular Setup that makes it possible to modify the settings to suit different kinds of jobs makes is like buying different types of tools in one. It‘s durable too.

DEWALT DW745 is a good investment whose efficiency far exceeds the cost.

Proofs:

I have owned the Dewalt DW 745 for 3 years now. During this period, I have only experienced two problems, one that was quickly solved. When I first bought the saw, the power switch went out after 5 cuts. I had to transport it several miles to have it replaced, which took a whole week. The second issue that I have with this table saw is that when you use the TS aligner, alignment to the left is not 100% accurate. The one to the right is just about perfect, though. This is a small matter that can be corrected through proper alignment, but it’s still a waste of time having to do it myself. If not aligned properly, it compromises the accuracy of the final product. If you have an affinity for proper woodwork, you can’t have that happening.

That aside, Dewalt DW 745 has been one of the best investment decisions that I made. It comes with a price that fits my budget. It is portable as well and hence easier to haul around. I can carry it to sight and assemble it easily. It barely takes me 10 minutes to set it up. I do not need to have a lot of storage space for it either because it’s foldable and compact. The rack and pinion fence design is the genius. It gives the saw greater levels of accuracy. I don’t think I could use a saw without this design after this. I wish it came with a stand, though.

They give you a 3-year warranty, which is a show of faith in the brand. In the 3 years that I have had mine, I have not had to invoke the warranty.

Overall, it’ a great saw for a good price, depending on the type of work you need it for.

Final Conclusion

DEWALT as a company is responsive. Should a problem be experienced by the user, the company readily replaces the parts that it needs to.

The features of this product that are what anyone looking for an efficient yet budget-friendly table saw would require. The added benefit if three years warranty gives one the confidence that it is a good brand. The portability and power are what make Dewalt DW 745 to me a product that stands out amongst the rest in its level.

An upgrade of the Dewalt DW745 is out and the new model is Dewalt DWE7480XA. It has a 10-inch blade like its predecessor. However, this new model has a 24-inch rip capacity as opposed to 20 inches, 15 amps and an rpm of 4800 as opposed to the older model’s 3850. It also has a rack to hold it up for easy set-up anywhere.

The Basic Knowledge necessary about Table Saws for Beginner

Purchasing a table saw is considered an important investment that a woodworker can make. If you are searching for a table saw, then you should take some time to consider the different options available for you. Read on to know more about the basics of table saws, the types, the factors to consider in making a choice and the top table saws in the market.

Who can benefit from using a table saw?

The professional contractor, woodworkers, furniture makers and even hobbyists can benefit from having a table saw. A table saw is a woodworking tool that consists of a circular saw blade that is mounted on an arbor. An electric motor drives the saw.

What are different types of the table saw?

Concerning portability, there are two basic types of the saw. One type is the portable one while the other is the stationary type. Beyond these types, table saws are classified as contractor saws, job site or portable saws, cabinet saws and hybrid saws. If you are looking to buy a new one, the first thing that you need to know is which type would best suit your needs. It is also worth knowing what to expect with the other types so you can choose appropriately.

  • Portable Table Saw

portable table saw

Portable Table saw – Jobsite saw

A portable table saw is designed in a way that it can easy be lifted and moved around, making this type the ideal portion for those carpenters and those who work on the job site. This kind of saw, however, performs the same basic functions as that of a larger type of saw. This type of saw is designed with a lightweight universal motor instead of the large induction motor that you will find in other types of saws. Because of its motor, this tool can be a little short on muscle and may be fairly loud.

Since this type is portable, most models come with an aluminum top instead of a top made of cast iron. While this may not be a problem, this design makes this type of table saw less durable. Also, this will affect product more vibration and may feel less stable during operations. A portable saw may lack the power that you need to rip thick hardwoods. However, this is enough to cut through sheet materials.

  • Contractor Saws

contractor table saw

Contractor table saw

This type of saw was originally designed to be portable. In fact, this can be hauled from one job site to another. This type is characterized by a straightforward design as well as an affordable price range. The contractor saw is lightweight, weighing about 250 pounds to 350 pounds.

Most models of contractor saws come with a solid cast iron table top and a stamped metal on its extension wings. The motor of this type of saw may be removed for easier transport. The motor is attached to the back of the saw, and this is connected to the device’s arbor assembly through the use of a single V belt. This type of saw is ideal for home shops and small carpentry projects.

  • Cabinet Saws

Cabinet saws are the kind of saw that comes with an enclosed cabinet style bottom. This type of table saw is designed to meet the durability and performance needs of a skilled and professional woodworker. When it comes to design, the contractor saw is considered more substantial, as this is built using steel and cast iron. Moreover, this comes with heavier gearing and arbor assemblies as well as a more powerful motor. When operating, this type produces less vibration.

cabinet saw

Cabinet saw

This type of table saw offers several features that one cannot find in other types of table saw. For instance, this comes with a cabinet base which is fully enclosed, making dust collection easier. The motor is attached to the base of the device, making alignment concerns easier.

  • Hybrid Saws

This type of table saw is basically a combination of the features of both the contractor saw and the professional cabinet saw. This is basically a more affordable cabinet saw. This type of saw comes in different designs. In fact, there are some models with the cabinet saw styled bases while others come with enclosed base and legs. In the two styles, the base is enclosed with its motor mounted inside. Such types of saws are designed with more advanced motor and better gearing compared to most contractor saws.

hybrid table saw

Hybrid table saw

The hybrid saw is a scaled down version of a cabinet saw. This is much lighter in weight and sturdier. This is a great option for those who consider themselves serious hobbyists.

What are the Most Popular Brands of Table Saw in the Market?

The top table saw brands in the market include Bosch, DeWALT, SKIL, SawStop, and Shop Fox. These brands have showcased great models of the table saw with exceptional features. Not just that, the different models come with varying strength and performance, allowing you to find the best one that would suit your cutting needs and preferences.

How to compare table saws

When buying a table saw, there are a few things that will really differentiate each product from the other. You should compare the following:

  • Price – what’s your budget? Are you looking for a high end or a low-end table saw?
  • Ease of use – if you’re a beginner woodworker, you might have limited space in your home or garage, so always check how large and portable the table saw is.
  • Cutting and power – compare the power and accuracy of your table saw options, as this will save you time later down the line. What’s the horsepower of the product and how big is the blade?
  • Fence (rip fence) and miter gauge: – This is an important tool and function of the table saw standard. The saw has the good fence and right miter gauge that is the good saw. They bring cutting accuracy for the material of table saw.
  • Dado cutting function: This is an important feature that makes grove on through work-piece long. You must have on your Table saw if you want to make furniture. Some table saw have and some don’t have, because It dependent the arbor of motor length, can install dado cutting blade or not.
  • Safety features – does the table saw have safety features? e.g. kickback prevention or a magnetic safety switch?
  • Tilt preference – although this is a personal choice, if you’re an experienced woodworker you might have a preference. Consider whether you’d like a left or a right tilt.

Choosing the Right Type of Saw for Your Woodworking Needs

The right type of saw for your shop would definitely depend on several factors like the type of woodworking that you cater, the amount of time that you spend working, your workspace, and your budget. If you only spend a few hours a week working in your shop doing small woodworking projects, getting a cabinet saw may be a little more than what you need. However, if you operate a small professional shop, getting a low-end contractor saw may not be your best bet as this can actually slow you down. A hybrid saw offers may be a great option if you consider yourself a serious hobbyist as this is suitable for small scale professional projects.

In addition to the type of saw that you choose, the features of the device are also important. You can find different features from one model to another. Likewise, the price range may also differ depending on the category that the saw belongs and the number of features that it comes.

Finding a good table saw that allows easy adjustments enables you to cut with great accuracy according to the measurements that you require. This is another important feature that you must look for when searching for a table saw. Since there are several options available, you have to be careful with the choice that you make to ensure that your investment is worth your effort and the money you paid.

Adjusting table saw blade on your saw

We are talking about the blade of the table saw, that we focusing at 10-inch saw blade standard with 24 teeth. Because this kind is popular in the market. It’s critical that you align and adjust your table saw blade, not just when you first purchase it but on a regular basis as well. This is because you want to make sure it’s safe, secure and producing good results.

Height of the Blade

Your table saw ought to be around 1/8 inch greater than the width compared to materials you are trimming. In case you put the blade nearer, you operate the unfortunate risk harming as well as sizzling the materials you are trimming, splitting the wood or even shattering the materials.

Adjustment of the Blade Angle.

On the top of the device, there exists a knob that enables you to modify the position of the blade. You can change this particular knob to the remaining for establishing the position of the blade and after that turn to the right to be able to lock this particular into the position.

Adjusting the Blade

You may require adjusting the saw blade to utilize the materials besides wood or even to develop a diverse category of trim. Whenever using some different types of components, you might change out or even adjust the blade many times throughout the task.

The two key factors to check are whether the miter gauge is parallel to the table saw’s blade and whether the rip fence is aligned. You will be able to find guidance from your manufacturer when it comes to the precise measurements required.

 

DEWALT DWE7480XA 10-Inch Compact Job Site Table Saw Review

Overview

6 months ago I was searching for ages trying to find the perfect table saw for my woodworking projects. Woodworking is my passion, and I love crafting at home, using the garage as my workshop when I have the spare time. After trawling through the internet and hours of Googling, I pretty much compared every single product out there. Belief me when I say there are plenty of options to choose from…

In the end and after 4 weeks of research, I chose the DEWALT DWE7480XA. I have to say, and it has not let me down. Reliable, consistent and a great price, I have recommended this table saw to everyone I know interested in woodworking.

First impressions

So it probably took about 10 minutes, maybe slightly more, from unboxing to setting up the table saw. Most of the time I was following the instructions, which are relatively simple when you’ve had to deal with Ikea manuals before!

It was surprisingly straightforward to set up. It’s perfect if you’ve been spending hours researching table saw’s like I had and just wanted to start using it straight away. What I liked was that the saw was still aligned from the package, so it didn’t require any further adjustments.

Portability

dw7480x job-site saw

Now, let me tell you about how portable this table saw is. I mentioned earlier that my garage is my woodworking workshop, and so I need a table saw that doesn’t take up too much space.

Working from home is great, but you’re always going to be limited on space. The DEWALT DWE7480XA is perfect for this. At a table size of only 26.5 ” x 25.8 “, it’s small, but you still get a lot of power. In fact, it’s got a spinning speed of 4,800 RPM and a 24 tooth 10-inch blade. That makes it effortless when I’m cutting through thick and tough wood. It may be small but don’t underestimate its power.

It also uses a scissor stand, so you can fold it up quickly without using up too much room and the scissor stand is carried separately from the saw, making it easy to move about when you’re spring cleaning the house. This also means I have room for other tools in the garage, without the table saw getting in the way too much. I can safely fold it up and pack it away if I know I’m going to be taking a break for a while.

Fence system

fence of dw7480x table saw

The Dewalt rack and pinion fence system also make my life a whole lot easier, with 24-1/2 inch of rip easily cuts a variety of larger shelving and trim materials. This has a telescopic rail fence system, so you can be quick and accurate when adjusting it. Before I bought this product, I read and watched a few videos stating how long you can spend making adjustments and fine tuning the alignment of your table saw. That made me worry a little. I barely get enough time to woodwork as it is, without having to tune fine my tools each time I use them…

However, with the DWE7480XA you won’t have to realign it every time you pick it up. You won’t spend hours working out how to adjust it. You’ve simply got a stable, solid fence.

Dust

When I’m woodworking from home, I like to keep things tidy. That means dust can be a big issue. Woodworking is a hobby for me, so the last thing I want to be doing is spending half of my spare time cleaning up when I could be crafting my next project.

Luckily, there’s a dust port on the DWE7480XA that hooks up to a 2-1 /2-inch vacuum, so it’s quick and easy to clean up. I was surprised by how little time I spent hoovering up dust. My surfaces are still smooth, 5 months later. This feature has also stopped my wife from complaining that the garage was a mess! I have to say there’s nothing worse than seeing dust all over your tools and garage, so you need a dust port like the DWE7480XA’s if you don’t want sawdust and chips everywhere.

However, I have to say some might get a little annoyed with the dust port. If you don’t have it attached to a hose, it will shoot dust all over your workshop or anyone in the way! It’s easy to make this mistake, especially if you haven’t used a dust collector on a table saw before. Just be mindful of this each time you use it. Otherwise, you’re going to be spending a long time cleaning up.

Guarding system:

safe guard system

The Site-Pro Modular Guarding System allows for tool free adjustments of the guarding components appropriate for each application. The guarding system is supposed to be useful if you’re concerned about safety.

Projects so far

I have to say; I love the DWE7480XA and I’ve had a lot of fun using it. It helped me so many times, and it allows me to be creative on my projects. From crafting a wooden iPad dock to building a birdhouse, in woodworking, you don’t have to be a pro or even that experienced to own one. I spent hours researching table saws, so I’m confident I’ve made the right choice.

For me, this isn’t just a table saw. It’s a way for me to express my creativity. I like the fact that it’s powerful and portable, so I can use it in my small garage while still having enough power and precision to craft accurately.

Conclusion

So now you can see why this table saw is perfect if you’re a woodworking enthusiast. It’s portable. Easy to clean, reasonably priced and incredibly good quality overall. You can buy the DEWALT DWE7480XA here from Amazon.com

Tips And Tricks To Effectively Use A Cordless Screwdriver

A cordless screwdriver is definitely a must have tool for professionals and hobbyists. This power tool is portable and useful in carrying out tasks like hanging pictures to framing a house. A cordless screwdriver is designed with a rotating motor and an adjustable chuck. This means that you can actually insert different things on the chuck to make them spin. This is what makes the cordless screwdriver quite flexible and useful.

If it is your first time to use this type of power tool, then you will surely find this rather convenient and useful in carrying out tasks on the job site. To help you out, here are some tips and tricks that can help you to use your cordless screwdriver effectively.

Use The Right Bits When Working With A Cordless Screwdriver

When working with power tools like a cordless screwdriver, it is critical that you use the right screwdriver bit. There are different kinds of bits available. The type of screw that you are working on will matter as well. The most commonly used bit that can fit medium wood screws is the PZ2. In choosing a bit, you can check the mark engraved on the metal.

how to use cordless screwdriver

Via Commons.wikimedia.org

Test To Check If You Are Using The Right Screwdriver Bit

Once you have determined the right bit to use, the next thing that you need to do is to make sure that the bit is tightly placed on the head of the screw. However, if you are uncertain, you should hold the screwdriver bit at a 45-degree angle. If the screw stays on the screwdriver bit and it does not fall off, you are using the right bit.

Make Sure The Bit Is Firmly Placed On The Head

When working with cordless screwdrivers, you have to make sure that the bit is firmly seated on the head of the screw that you are working on. When you are drilling, you have to make sure that you apply the right amount of pressure to the top of the cordless screwdriver to ensure that the screwdriver bit will stay in the head of the screw as you drill.

Hold The Screw In Place

If you want to make sure that the bit or the screw will not slip as you are driving it into the wood, you have to grip the screw's sides gently. With this technique, you will be able to hold the screw in place until it begins to bite into the wood.

Use grip to hold screw

Via Diy.com

Opt To Pre-drill A Pilot Hole On Hardwood

Holding screws in place is ideal if you are working on pine woods and the same type of wood. However, if you are working on the hardwood, you have to pre-drill a pilot hole. This should make the job easier.

Applying Additional Pressure Using Your Hands Or Shoulders

If you notice that the screwdriver bit is slipping out of the head of the screw, this would mean that you are not applying enough pressure on the tool. To address this problem, you can compensate the applied pressure by pushing down harder on the top of the back portion of the drill using your left hand. Moreover, you can also put your shoulder into the screwdriver to apply additional pressure on the tool.

how to use a cordless screwdriver

Achieve Controlled Pressure By Using On And Off Technique

You have to remember to ease back on the pressure once you notice that the screw is almost in place. If you fail to do this, the screw will end up sinking deeply into the wood. You can make use of the on and off technique as this can give you more control over how deep the screw that you are working on is driven into the wood.

Practice First Before Working On The Actual Project

If you are fairly new to using a cordless screwdriver, you have to make sure that you practice on a piece of wood first before working on the actual project. With practice, you will learn how to control the tool. It is also worth reading the manual of your power tool and learning about the different features of the tool, as this will ensure that you will know what to do when working on the actual project.

Read more woodworking tips

DEWALT DCK296M2 20V Hammerdrill and Impact Driver Combo Kit Review

Introduction

With the increasing demands over time, DeWalt has always been trying to bring something which can satisfy customer needs and demands in the field of plumbing, electrical, construction and mechanical installation tasks. DEWALT DCK296M2 20V XR Lithium Ion Brushless Premium Hammerdrill and Impact Driver Combo Kit is one of the most recent and powerful brushless drill that comes with high-torque speed for fastening and drilling operations.

With this review article about DEWALT DCK296M2 20V XR Lithium Ion Brushless Premium Hammerdrill and Impact Driver Combo Kit, we will try our best to discuss almost everything about this highly functional drilling tool in brief.

Top Features of DEWALT DCK296M2DEWALT DCK296M2 20V XR Lithium Ion Brushless Premium Hammerdrill and Impact Driver Combo Kit

At the very initial stage, you should have a look at some of the top features of DEWALT DCK296M2 20V XR Lithium Ion Brushless Premium Hammerdrill and Impact Driver Combo Kit.

  • This highly impact driver has the capability of providing approximately 1500 inches-lbs of torque speed which is enough for performing the fastening applications within a very short time.
  • The motors of this impact driver is brushless so that you can use this tool for a variety of tasks.
  • One of the great features of this power tool is that it comes with LED lights which have the 20 seconds trigger delaying functionality.
  • The beats are 0 to 34,000 per minute and the revolutions are 0 to 2,000 per minute of this DeWalt Hammerdrill.

Benefits of DEWALT DCK296M2

Now, we will discuss one of the most vital sections of this review article which is about the benefits of the DEWALT DCK296M2 20V XR Lithium Ion Brushless Premium Hammerdrill.

  • With the DeWalt brushless motor impact driver, you will get about 57% more running time in comparison to that of the brushed ones. This will help you to perform your tasks considerably for more time that you have ever got.
  • The powerful batteries of the DeWalt hammerdrill has the ability to provide 33 percent more capacity than the ordinary ones so that you can get the maximum from this hammerdrill.
  • With 0-34000 BPM, this powerful hammer drill can help you performing the drilling and fastening tasks within a little time. This will save both of your time and energy.
  • With the LED lights, you get the opportunity to use this hammerdrill in the dark areas very conveniently.

Customer Score

When we were collecting information about the DEWALT DCK296M2 20V XR Lithium Ion Brushless Premium Hammerdrill and Impact Driver Combo Kit, we, on the amazon, had found that more than 301 customers have given reviews about this product.

And, you will be very happy to hear that the average score this product has got is 4.70 out if 5.00 which clearly indicates that it is a very effective and helpful power drill.

Pros & Cons

Main Use of This Product

Actually, you can use the DEWALT DCK296M2 20V XR Lithium Ion Brushless Premium Hammerdrill and Impact Driver Combo Kit for a variety of tasks. But, the most common tasks you can effectively perform with this DeWalt hammerdrill are listed in the following:

Drilling tasks

Whether it comes to the matter of residential or commercial drilling tasks, the DEWALT DCK296M2 20V XR Lithium Ion Brushless Premium Hammerdrill and Impact Driver Combo Kit is the perfect option for these types of drilling operations.

Driving operations

At the same time, you can choose this DeWalt impact driver for any kind of driving tasks at your home or, workplace.

Fastening tasks

For any kind of fastening operations, the greater torque speed of the DeWalt impact driver  is the right kind of solution. According to the size you need, you can change the fastening options of this hammerdrill.

Plumbing jobs

In addition, a wide variety of plumbing tasks can also be done with the help of the DEWALT DCK296M2 20V XR Lithium Ion Brushless Premium Hammerdrill and Impact Driver Combo Kit.

Construction works

For the construction sites, one of the most helpful and vital tolls is the DeWalt powerful hammerdrill.

Electrical installations

Besides, you can choose this powerful impact driver for different types of electrical installation tasks.

Mechanical installations

And, for ding the mechanical installation, the DEWALT DCK296M2 20V XR Lithium Ion Brushless Premium Hammerdrill and Impact Driver Combo Kit can be regarded as one of the most popular and useful choice of the mechanics.

Conclusion

Now, you have got to know about every aspect of the DEWALT DCK296M2 20V XR Lithium Ion Brushless Premium Hammerdrill and Impact Driver Combo Kit. We believe that you have got every single detail of this hammerdrill after reading the above paragraphs. If you think that you want to collect more information about this powerful electric drill, then you can search other websites on the internet.

How an Air Impact Wrench Works

A pneumatic impact wrench or an air impact wrench is a power tool that makes use of air source to remove as well as tighten nuts and bolts at speed. This power tool is different from other types of power wrenches as this tool can actually deliver torque in instant jolts and not in a steady force. This power tool makes use of strong twisting motions to free stubborn bolts that have become rather tight due to rust and other elements. With this tool’s multiple sharp as well as short torque applications, this can remove even the most stubborn fasteners.

Air impact wrench

One type of Air impact wrench

There are different models on this type of power tool. The models differ in terms of torque and weight. These aspects affect the usability of the tool. with the drive mechanism, this tool has a lot of competitors. Moreover, there are also tools that are cordless and electric powered. Depending on the purpose and type of job that you need to complete, you may need to decide whether or not an air impact wrench is a right tool for you.

Power and Performance of an Air Impact Wrench

In terms of power, an impact wrench is used by mechanics to remove and unfasten lug nuts as well as other bolted parts of a vehicle. This is an ideal tool for many mechanics as this offers high power output and torque. Moreover, this tool requires less manual tuning on the part of the mechanic. This type of tool is called an impact wrench as this operates through a spinning motor, which delivers a shock of power to the bolt or nut. In return, this shock loosens as well as turns the nut rather quickly, allowing it to be removed.

Pneumatic_Torque_Wrench-1

Learning More about the Tool’s Design

An impact wrench comes with a housing that is shaped like a gun. This is designed with a bit that comes with a nut driver attachment, air cord and a handle. The air cord delivers the compressed air towards a chamber inside the pneumatic wrench. Once the compressed air comes in contact with the turbine-shaped motor inside the tool, the motor spins. The trigger mechanism in this tool allows the air to come in contact with the motor. Thus, power is released. For the other types of impact wrenches like those that makes use of electricity, the motor functions once electricity is provided.

Steps to Operate an Air Impact Wrench

There are three steps that involve operating an air impact wrench. Here are the steps:

  • Step 1: Assembly

The first step in operating an air impact wrench involves assembly. You have to take note that this power tool looks like an old fashioned drill. In fact, this comes with a silver metal body as well as a trigger release switch that allows the user to exert just the right level and amount of torque pressure and air. This tool is also attached to a long rubber hose that is connected to the air compressor or air pressure unit. The pressure will only be released when the user applies pressure to the tool’s trigger. When assembling an air impact wrench, you should check the user’s manual and follow the instructions carefully.

Air compressor

Air compressor(photo by Laineema)

  • Step 2: Testing the Tool

Once you got all the attachments ready, you can start testing your tool. You can check whether the unit is exerting the correct amount and level of pressure. You have to make sure that the hose line is free from any kinks or twist to ensure the delivery of the right amount of pressure. You should test the direction that the wrench is set through lightly touching the tool’s trigger. This way, you will be able to see and determine the way where it will turn. You will be able to find a latch or a knob on the side of the tool. This knob or latch allows you to switch and reverse the direction of the socket. If you want to loosen bolts, you have to make sure that the latch faces counter clockwise. On the other hand, if you want to tighten the bolts, you have to make sure that it faces the clockwise direction.

  • Step 3: Choosing the Right Speed

There are wrenches that allow the user the assign the correct speed when working on a project. To do this, you can find a switch or dial on the side of the wrench. You can switch and set the correct speed for the project that you are trying to complete. Once you have the correct speed and torque level, you can attach the correct size of the socket to the bit which is located in front of the wrench. Once you have everything set up correctly, you can now start working on your project.

 

Bosch IDH182-01L 18 volts hybrid tool with ¼ – inch hex and ½ inch Square driver chuck for socket

Bosch is a German company which is very famous for manufacturing electronic items. This company started its business operations from the year of 1886. Up to this date, we have seen that this company has introduced numerous numbers of companies. Among different kinds of electronics goods, the most recent one is known as Bosch IDH182-01L 18-volt Brushless Socket Ready Impact Driver.

After the launching of this impact driver, it started to attract all sorts of buyers from all over the world. The main reason behind this is the super level of performance it has. In comparison to other available 18 volt drivers, the Bosch IDH182-01L is more powerful and easy to handle. Before we started writing this review, we have tried to research the full market. And, we hope that you will get to know all the aspects after reading this review about Bosch IDH182-01L impact driver.

Benefits Of Bosch IDH182-01L For The Users

In this review, the first thing which we will be starting with is the benefits you can get from this driver. So, let's take a look on the benefits of Bosch IDH182-01L Impact Driver.

The first thing you should know is that you will get elegance, versatility and high-quality from this impact driver. The manufacturers actually heavily concentrated on the materials used for the production of this driver. For that reason, this driver is very elegant and durable at the same time.

The power system used in this machine is very high. At the same time, the controlling is also very user-friendly. Therefore, the users will find this driver very comfortable and easy to use while working with it.

One of the most unique additions of this driver is the socket-ready adapter. You cannot get this feature from any other kind of driver currently available in the market. This impact driver is perfect for both the ¼ inch Quick change Hex screwdrivers and 1/2 inch Square driver chuck for socket. For a combo driver, the Bosch IDH182-01L is the ideal choice for you.

Another great benefit of this impact driver is the all-in-one tool-holder option. This extra-ordinary option will provide you all sorts of solutions within a very short time.

At the same time, you can get the latest technology from the Bosch IDH182-01L impact driver. Yes, the technology is named as the EC brushless motor. The presence of this technology will help to increase the motor-life of this driver.

The battery used in this driver can be another great benefit you can get. Actually, the battery is manufactured using the most intelligent sell technology. At the same time, they have also used the motor protection technology for producing the battery. This will surely give you a battery with improved life-cycle.

You should also know that this Bosch impact driver comes with the built-in hammer and anvil. The addition of these tools has made this driver a very powerful performer. You can expect to get the optimum level performance from this highly versatile impact driver.

At the same time, this device is made to help you working for long period of time. The machine is comparatively light which has made it a user-friendly driver. And, the compact head-length is there to give support for working for a longer period of time.

Benefit of Bosch IDH182

This impact driver has the torque speed of 1650 pounds. At the same time, you will get the adjustment setting mode for different power levels. You can adjust the power setting for performing various kinds of driving operations.

Exclusive Features Of Bosch IDH182-01L Hybrid Impact Driver

feature of bosh IDH182

At this point, we will be discussing some of the exclusive features of the Bosch IDH182-01 Impact Driver.

The perfect all-in-one driver with the impact wrench which has 1/2-inch Square Drive chuck and 1/4-inch fast-change Hex for sockets.

The brushless motor is the most unique feature of this impact driver.

The motor-life of this driver is almost double than that of the competitive drivers.

The motor is designed to provide superior efficiency for the driving jobs. There is no need for the maintenance of the motor.

This impact driver can be referred to be the most advanced kind of driver.

The performance controlling system comes with the 3 speed torque-setting mode. So, you can increase or, decrease the power setting mode.

The grip is very easy to handle for working on constant basis.

Pros And Cons

Pros

You will get the speed controlling system for adjusting the speed of this impact driver.

A combo driver which works perfectly as a quarter-inch and half-inch impact driver as well.

This driver has been manufactured using the latest technology for providing the best driving operations.

It is an all-in-one perfect impact driver with versatile functions.

The motor life and the battery life have tremendously been improved.

Cons

The price is comparatively high.

Sometimes creates loud sound when working.


Frequently Asked Questions

In this section, we will be discussing about the frequently asked questions about the Bosch IDH182-01L Impact Driver.

1. What is the charging volt of the Bosch IDH182-01L impact driver? 220 volt or, 110 volt?

2. Does the charger of this driver support 220 volt?

3. As it is a recent impact driver of Bosch, so is it available in the market?

Conclusion

After the above review about Bosch IDH182-01L impact driver, we can say that it has been designed with the latest technology. For the use of the modern technology, this driver comes with the improved battery life. At the same time, the motor life of this driver is also great. As an 18-volt impact driver, we think that Bosch IDH182-01L is the ideal option for you at the current time.

Click here to Read more information about best impact driver ultimate guide

Porter-Cable PCCK640LB 20-Volt 1/4-Inch Hex Impact Driver Kit Review

Porter-Cable is a subsidiary of the parent company known as Stanley Black & Decker. This is an American company and the headquarter of this company is located at Jackson, Tennessee. This subsidiary company has started its business activities from the year of 1906. This company is specialized in producing mainly power tools and pneumatic tools. In the recent times, this company has introduced one of the most powerful impact drivers PORTER-CABLE PCCK640LB 20-volt 1/4-Inch Hex Lithium Ion Impact Driver Kit.

Before writing this review, we tried to gather information about the PORTER-CABLE PCCK640LB Impact Driver. And, we have found that this driver is one of the most high-selling drills at the current time. This highly diversified impact driver comes with all the latest features and options. The high-torque motor of this driver is the main reason for calling it a great drill.


Benefits Of Porter-Cable PCCK640LB For The User

It is to be noted that the PORTER-CABLE PCCK640LB comes with a wide range of benefits and advantages for the users. Here, we will try to explain almost all the major benefits which you must know about this driver kit.

The PORTER-CABLE PCCK640LB Impact Driver Kit comes with a great benefit which is known as the high torque motor. The high torque motor of this driving kit is great to perform like a heavy player. The speed of this motor is around 1450 inch-pounds. For a 20-volt impact driver, this speed is great for doing driving and drilling tasks. For an automotive worker, this impact driver can serve as a great drill with the higher level of drill functions.

porter cable impact driver

Via: Amazon

The next benefit about which we will be talking about now is the speed of this driver. The manufacturers have heavily concentrated on speeding up this device. For this purpose, they have added the high-performance transmission feature.

The PORTER-CABLE PCCK640LB has a great transmission speed. The speed is about 0-2900 RPM or, 0-3000 BPM for providing the most efficient and quickest driving. This level of transmission speed can help you with a continuous service without any break. For example, you can continuously drive like hundreds of screws within a short time.

The PORTER-CABLE PCCK640LB 20-volt 1/4-Inch Hex Lithium Ion Impact Driver Kit comes with the latest sort of lithium ion battery. This battery is there for giving you the long lasting power feature which you cannot find the competitor level drivers.

The cordless feature of the PORTER-CABLE PCCK640LB impact driver gives you the option of carrying it to any place where you need the driving operations effectively done.

One of the most useful additions of the PORTER-CABLE PCCK640LB driver is the 4 LED work light. Because of the presence of this LED light, you do not need to hold a flashlight at the time of working in the tight or congested areas.

frame installation

Via: Amazon

The pistol grip of the PORTER-CABLE PCCK640LB gives the users a very comfortable handling feature for making the right balance of its weight while working with this impact driver. The compactness of this driver kit ensures that the workmen can get the driving job done perfectly at the first attempt.


Top Features Of Porter-Cable PCCK640LB

Higher level of transmission for providing swift fastening applications.

Compact tool has the ability to fit in the tight areas which will reduce your fatigue while working

Easy-load chuck option gives the users the opportunity of inserting the bit using one hand.

Via: Amazon

The battery fuel gauge is there for displaying the charge indicator which helps the users to identify the remaining charge while working.

LED light addition is there for providing extra lighting feature while working on the dark areas.


Pros & Cons


Pros

  • Price is much affordable in comparison to that of the competitor's drivers.
  • Presence of higher level of the torque motor.
  • Compactness option gives you the feature of getting the job perfectly done without facing any kind of trouble.
  • Longer sort of battery life gives you the great type of power backup while performing the drilling operations.
  • Fast charging feature will save your time in a great way.

Cons

  • The weight of this driver is a bit heavy in comparison to that of other similar impact drivers.
  • The users have to hold it tightly while performing the driving jobs.

Frequently Asked Questions

1. How many batteries come with the PORTER-CABLE PCCK640LB Impact Driver Kit?

2. Is there any specific time period for charging the battery for the first time after the purchase?

3. Will I get a charger with this impact driver?

4. Can I use this driver for taking off the wheels from a car?


Conclusion

Now, you have almost got to know all the features and attributes of the PORTER-CABLE PCCK640LB 20-volt 1/4-Inch Hex Lithium Ion Impact Driver Kit. Although there is a little negative side which is the heavy-weight, but as a 20-volt impact driver, the PORTER-CABLE PCCK640LB is a sort of heavy player in the driving field. For personal or commercial use, you can undoubtedly go for the PORTER-CABLE PCCK640LB impact driver. At an affordable price, the PORTER-CABLE PCCK640LB is the best 20-volt impact driver for you.

Click here to read more about Milwaukee 2653-20 M18 FUEL ¼-inch Hex Impact Driver

1 2 3